Call Us Today : (323) 636-8421

Facebook Twitter Instagram Youtube Yelp Linkedin
Get Estimate

What is Post-Construction Glass Scratch Removal

A professional restoration process that removes construction-related damage—razor tracks, mineral debris scours, suction-cup trails, weld spatter, and light etching—returning glass to clear, uniform appearance without replacing the pane.

Why it matters (long-term benefits)

  • Restore, don’t replace: Avoid costly custom re-glazing and lead times; restoration is typically far less expensive and faster than new glass.
  • Minimize downtime: Most panels can be restored in place, reducing schedule delays and punch-list friction.
  • Maintain aesthetics: We target scratches and haze while preserving optical clarity and sightlines—critical for storefronts and view glazing.
  • Protect warranties & budgets: Keep projects on track, avoid change orders, and prevent cascading trades delays.
  • Sustainable choice: Extends the life of installed glazing and avoids landfill waste.

Common causes we fix

  • Razor or scraper marks
  • Grinder or ladder contact
  • Stucco/paint cleanup damage
  • Cement/mineral drag
  • Weld/grinder spatter dots
  • Suction-cup/handling trails
  • Light acid-etch and haze

Our process

  • Survey & tagging – identify every affected pane, mark locations, and set expectations.
  • Protection & containment – mask frames/finishes; control dust and slurry for clean work areas.
  • Precision repair – targeted dry/wet grinding to remove defects, followed by progressive polishing.
  • Optical blending – refine and blend the repair zone to match surrounding glass, minimizing distortion.
  • Quality check – inspect in raking light and daylight from multiple angles; client walk-through.
  • Final clean & sign-off – neutralize, detail, and leave maintenance guidance.

What we can (and can’t) fix

  • Ideal: Light to moderate surface scratches, swirl marks, haze, suction-cup trails, small spatter.
  • Often feasible: Heavier scratches not through the surface that haven’t caused deep gouging or edge cracks.
  • Not repairable: Cracks, chips through the glass, edge fractures, lamination failures, or severe thermal stress damage—these require replacement.

Spec notes (for GCs & PMs)

  • Glass types: Tempered, heat-strengthened, annealed, IG units, doors, storefronts, and partitions.
  • Method: Diamond abrasives + cerium oxide polishing; localized, progressive blends to control distortion.
  • Access: Most work performed in place; lift/rope access available where required.
  • Finish standard: Clear to the eye at normal viewing distances and angles under typical ambient light.
  • Documentation: Pane map, before/after photos, and completion report available upon request.

Care & prevention after turnover

  • Use non-metal blades only when absolutely necessary; keep blades flat and lubricated.
  • Rinse heavy grit before wiping; avoid abrasive pads.
  • Protect glass during adjacent trades (masonry, stucco, metal grinding).
  • Establish a “glass-first” cleaning protocol to prevent re-scratching.

Post-construction glass scratch removal puts your project back on schedule, preserves the design intent, and saves money—without the headaches of ordering and installing new glass.